Menu
Door sill painting: Cut the two widths of the panel separately – Edge wrap – Milling – Pressing – Primer – Sanding – Precision cutting – Installation of hinges and keyholes – Final painting
Or: The two widths of the panel are cut separately – edge wrapping – milling – pressing – primer – sanding – final painting – precision cutting – installation of hinges and keyholes
Required equipment corresponding to:
-
Cutting saw
-
Edge banding machine
-
Door sill milling machine or four-sided shaping machine
-
nail press machine
-
paint sprayer
-
Door sill sander
-
Door sill measuring machine
-
Hinge and keyhole installation machine
-
Final coating machine
| Model | RDJ-X2K1J1 |
| Workpiece width range | 50-400mm |
| Minimum workpiece length | 600mm |
| Workpiece thickness range | 15-100mm |
| Feeding speed | 5-15m/min (Frequency) |
| Feeding motor power | 3.7kw |
| Milling cutter motor power | 5.5kw*2, motor with shaft structure |
| Number of milling cutter spindles | 2 sets |
| Milling cutter rotating speed | 6000 r/min |
| Dimensions of milling cutter spindle (shaft diameter*length) | Φ35*100mm |
| Rubber strip slot saw motor power | 4kw, square shell special motor |
| Rubber strip slot saw rotating speed | 4000 r/min |
| Number of rubber strip slot saw spindles | 1 set |
| Automatic fixed width slotting saw motor power | 5.5kw*1 4kw*1, motor with shaft structure |
| Automatic fixed width slotting saw rotating speed | 4000 r/min |
| Number of automatic fixed width slotting saw spindles | 2 sets (Servo adjustment) Shihlin PLC |
| Suction port (quantity * size) | 1*80mm 7*120mm |
| Lifting motor power | 0.55kw |
| Saw blade size (outer diameter) | Max. 250mm |
| Total power | 28.75kw |
| Mechanical Dimensions | 5400*1700*1550mm |
| Weight | 3300kg |
Recently Viewed Products