ماكينة تغليف الحواف الأوتوماتيكية للقطع المائل والمستقيم

Straight and beveled edges or just straight edges can be done on the same machine.
Minimum piece size (slanted and straight): 250×250×15 mm
Minimum piece size (straight only): 120×120×9 mm
The edge of the straight part must be more than 5 mm.
PVC strip thickness: 0.6-15mm for oblique and straight cuts, 0.4-3mm for straight cuts

Model	RFB765H
Panel length	Inclined Straight: ≥250mm Straight: ≥120mm
Panel width	Inclined Straight: ≥250mm Straight: ≥120mm
Panel thickness	Inclined Straight:15-25mm Straight: 9-50mm Straight reserved: >5mm
Edge band thickness	Inclined Straight: 0.6-1.5mm Straight: 0.4-3mm
Infeed speed	0-22m/min (5.5kw feeding motor)
Lifting motor	0.37kw
Air pressure	0.6 MPa
Total power	28kw
Overall size	1096010001900mm