ماكينة السحب السلكي

The machine is used for solid wood, density board, veneer, laminated materials and other materials.
The drawing machine adopts a separate design with four independent rollers (two wire drawing rollers and two polishing rollers). Four independent four-axis drive covers effectively solve the dust problem.
The two wire drawing reels are each controlled individually by a frequency converter (inverter), allowing the rotation speed to be adjusted according to the desired drawing effect.
The four rollers can be individually adjusted to move up and down, left and right, to achieve different depths of surface treatment.

Model	RLS630R4	RLS1000R4	RLS1300R4
Working width	40-630mm	40-1000mm	40-1300mm
Working thickness	2-100mm	2-100mm	2-100mm
Working length	≥420mm	≥420mm	≥510mm
#1 sanding unit motor power	5.5kw	7.5kw	11kw
#1 sanding unit speed	3-18 m/s (frequency speed)	3-18 m/s (frequency speed)	3-18 m/s (frequency speed)
#2 sanding unit motor power	5.5kw	7.5kw	11kw
#2 sanding unit speed	3-18 m/s (frequency speed)	3-18 m/s (frequency speed)	3-18 m/s (frequency speed)
#3 sanding unit motor power	2.2kw	2.2kw	5.5kw
#3 sanding unit speed	22 m/s	22 m/s	22 m/s
#4 sanding unit motor power	2.2kw	2.2kw	5.5kw
#4 sanding unit speed	22 m/s	22 m/s	22 m/s
Feeding speed	2.5-12.5 m/s	2.5-12.5 m/s	2.5-12.5 m/s
Swing motor	0.18kw*4	0.18kw*4	0.18kw*4
Feeding motor	1.5kw	1.5kw	3.0kw
Lifting motor	0.55kw	0.55kw	0.55kw
Total motor power	18kw	22.2kw	37.3kw
Working air pressure	≥0.6Mpa	≥0.6Mpa	≥0.6Mpa
Working voltage	380V, 50Hz	380V, 50Hz	380V, 50Hz
Dust collect required	8200m3/h	8200m3/h	8200m3/h
Dust collect speed	≥25m/s	≥25m/s	≥25m/s

ماكينة تشكيل إطارات الأبواب

آلة صنفرة بالفرشاة